М-02/40..80 Air termination mast 4-8 m

• It is used for protection from lightning strikes of roof elements and equipment or constructions on the roofs of the buildings (ventilators, ventilation ducts, solar collectors etc.)
• It is fixed to the wall with 2 or 3 mast holders art. М-060, М-062 or M-050 (is ordered separately)
• Withstands the maximum wind load of 0,55 kPA (І, ІІ, ІІІ and ІV wind zones) according to the building regulations В. 1.2-2:2006
• Meets the standards of IEC 62305-3 and IEC 62561-2about the air termination rods

Components and materials of air termination rod:

• NI mast ø42 mm (for H: 6-8 m) with length h1 – 0..1 pc
• NI mast ø32 mm (for H: 6-8 m) with length h2 – 1 pc
• AL mast ø30 mm (for H: 4-5 m) with length h2 – 1 pc
• AL rod ø16 mm with length h3 – 1 pc
• AL rod ø10 mm with length h4 – 0..1 pc
• ST connector with a wire М-030 – 1 pc
• set of fixation elements for mast connection – 1 pc

Connection of the elements to each other:

• h1-h2 – with a sleeve 42/32,
• h2-h3 – threaded М16,
• h4-h5 – threaded М10